1st > erase startup-config after that > reload Note : Do not save the running configuration when prompted.

Change the console port password. In this example, you set the authentication mode to password authentication and the password to subhais@123....

<3328> system-view interface range gigabitethernet 0/0/1 to gigabitethernet 0/0/2

Despite the error displayed, which leaves no hope for a solution, keep smiling, as you're about to be given one....

MikroTik RouterOS v7 Commonly Used FiltersNotes about using the filers Starting in ROSv7, the filters are in a “normally closed”...