Despite the error displayed, which leaves no hope for a solution, keep smiling, as you’re about to be given one. There are two undocumented commands that can be used to force the Cisco Catalyst switch to enable the GBIC port and use the 3rd party SFP: ASR-1004(config)# service unsupported-transceiver Warning: When Cisco determines that a fault […]
How To Force Your Cisco Switch To Use 3rd Party SFPs Read More »
CiscoRouter Configuration: R1>enable R1#conf t R1 (config)# hostname CiscoRouter CiscoRouter (config)# interface FastEthernet0/0 CiscoRouter (config-if)# ip address 104.10.1.2 255.255.255.252 CiscoRouter (config-if)#no shutdown CiscoRouter (config-if)#exit CiscoRouter (config)# interface FastEthernet0/1 CiscoRouter (config-if)# ip address 172.16.2.1 255.255.255.0 CiscoRouter (config-if)# no shutdown CiscoRouter (config-if)# exit CiscoRouter (config)# interface tunnel 0 CiscoRouter (config-if)# ip ip address 192.168.1.2 255.255.255.252 CiscoRouter (config-if)#
GRE Configuration Between Mikrotik And Cisco Router Read More »