BDCOM Epon OLT All Show Command

Leave a Comment / OLT / By
  1. show epon active-onu – All Active ONU information 
  2. show epon active-onu interface epoN 0/1 – Specific active onu information 
  3. show epon active-onu mac-address 8479.73fb.3f9d – Search onu by mac address
  4. show epon always-laser-on-onu – For check Always laser status on the ONU 
  5. show epon always-laser-on-onu interface epON 0/1 – For Specific epon Always laser status on the ONU
  6. show epon basic-info – Basic information of the OLT 
  7. show epon encryption – Show Global-level encryption parameters of an OLT
  8. show epon encryption interface epoN 0/1 –  Show specific epon interface Global-level encryption parameters of an OLT
  9. show epon inactive-onu -For show Inactive ONU information
  10. show epon inactive-onu interface epoN 0/1 – For Specific epon interface inactive ONU information
  11. show epon interface epON 0/1:6 onu ctc basic-info -For ONU basic information
  12. show epon interface epON 0/1:1 onu port 1 state – For onu lan port status check
  13. show epon interface epon 0/1:14 onu ctc dba – For Show the oNU queue the DBA set the config 
  14. show aaa users – For Show AAA Active Login user information 
  15. show aggregator-group detail -For show Link Aggregation(Bonding) information 
  16. show alias – For show the Alias command
  17. show the arp – For show ARP table with ip & interfaces 
  18. show break – For show  Switch breakpoint information 
  19. show running-config – For Show full configuration 
  20. show running-config interface epON 0/1 – For show specific epon interface configuration
  21. show running-config interface epON 0/1:4 – For show specific onu configuration
  22. show cpu -For how much CPU usage in olt 
  23. show debug – For show State of each debugging option
  24. show dot1x – For show IEEE 802.1X information
  25. show epon optical-transceiver-diagnosis – For show all Epon optical power(dBm)
  26. show epon optical-transceiver-diagnosis interface epoN 0/1 – For see specific epon all onu optical power(dBm)
  27. show epon optical-transceiver-diagnosis interface epON 0/1:4 – For Show Specific ONU optical power(dBm) 
  28. show gpon onu-optical-transceiver-diagnosis interface gpON 0/7   – For show all onu rx tx power “GPON only”
  29. show epon onu-ctc-optical-transceiver-diagnosis interface epoN 0/1 – For show all onu rx tx power
  30. show epon onu interface epon 0/x:x onu ctc optical-transiver- diagnosis – For show all onu rx tx power
  31. show epon  interface epoN 0/1:2 onu ctc snmp-info – For show ONU SNMP information
  32. show epon interface epON 0/1:2 onu d-info – For show Double mac address information
  33. show epon interface epON 0/1:2 onu mac address-table – For Show ONU MAC address table
  34. show epon interface epon 0/1: 1 onu mac-aging-time -For show onu Mac aging time 
  35. show epon interface epon 0/1: 1 onu olt-info -For show olt information 
  36. show epon interface epon 0/1: 1 onu pon-port statistics – For Show ONU interface statistics 
  37. show epon interface epon 0/1: 1 onu pon-port state – For Show ONU interface state
  38. show epon interface epoN 0/2:8 onu port 1 ctc auto-negotiation – For show ONU interface auto negotiation 
  39. show epon interface epoN 0/2:8 onu port 1 ctc flow-control – For Show ONU interface flow control state
  40. show epon interface epon 0/1: 1 onu port 1-4 ctc mcst mc-vlan – For show onu Multicast 
  41. show epon interface epoN 0/2:8 onu port 1 ctc mcst tag-stripe – For show onu strive vlan tag
  42. show epon interface epoN 0/2:8 onu port 1 ctc qos – For show ONU interface qos
  43. show epon interface epON 0/1:21 onu port 1 ctc ratelimit-ingress /  egress- Show ONU interface bandwidth limitation
  44. show epon loid-bind-table – For show bind LOID The table 
  45. show arp – For show ARP table here you see olt vlan ip with mac address
  46. show configuration – For Show configuration (this option only read mode user) 
  47. show epon mpcp-registration-mode – For show Multipoint control protocol registration mode 
  48. show epon onu-authen-method – For need to see onu authentication method 
  49. show epon onu-information – For see all onu information under every epon 
  50. show ether-ring – For show display EAPS information(Ethernet Automatic Protection Switching) 
  51. show interface brief -For show all interface status
  52. show interface range epoN 0/1 – For show epon tx & rx power(dBm) & all status
  53. show interface Epon 0/1 – For show specific interface information
  54. show ip route detail – For show all route in olt
  55. show ip route static – For show static route
  56. show ip route all – For show routing table
  57. show ip route information – For show routing information
  58. show ip interface vlAN 1 – For show specific interface ip configuration 
  59. show local-users -For Show all user
  60. show logging – For Show all log 
  61. show mac-address table – For show all MAC address table
  62. show mac address-table interface epoN 0/1 – For show specific epon interface mac table
  63. show mac address-table interface epoN 0/1:1 – For show specific onu interface mac table
  64. show ip sshd – For show Sshd status 
  65. show ip traffic – For show ip traffic information
  66. Show line – For show line information 
  67. show running- config – For show olt running configuration
  68. show onu-config-template – For show  template-config
  69. show policy-map – Show policy-map based bandwidth configuration
  70. show telnet – For show incoming telnet connections 
  71. show vlan – For show Vlan information
  72. show mac address-table dynamic – For show dynamic MAC Address

Leave a Comment

Your email address will not be published. Required fields are marked *

Subscribe to our Newsletter

To get Any Update Notifications

Features

  • Overview
  • Design
  • Programming
  • Collaborate
  • Coming Soon

About

  • Stories
  • Community
  • Blog
  • Careers
  • Brand Assets
Scroll to Top